Remote Programming Constant Power SMPS with Ramp Generator and Optional Ethernet Card.

This DC power supply is capable of generating Ramp and other forms of DC waveform. An ARM construction RISC 32bit micro-processor is used for such DC waveforms. There are 3 voltage generators which can either be panel controlled or by remote programming via USB port.

Through the various combinations of the settings in the time gradient and period of the generated voltages, various repeatable ramp up/down , step , triangle , and other designed wave forms of output voltage can be obtained from setting of V , I & T.

In the remote programming mode various repetitive cycles with different cycle period , voltage and current can be set in the connected PC and data logging as well.

With the addition of optional Ethernet control card, the power supply is capable of LAN or WAN connection such that it can be communicated ,controlled , monitored , and data logging via the internet. One PC can take care of 250 power supplies even with C type of Ethernet. This power supply is ideal for R&D laboratory , education , burn in test especially for devices where the effect of irregular DC wave forms or surge is critical.

We do provide application software, USB driver, command sets , Ethernet software, and Labview driver.