A high power smart charger designed for fast & safe charging of Lead Acid and LiFePO4 batteries with optional WiFi connectivity for remote monitoring of charging status of battery. The advanced Micro-processor control allow specific charging profile for Lead, AGM and LiFePO4 battery from 16AH to 200AH.
Main features
- There is a WiFi version of same charger to allow for remote monitoring of charging status of battery on smart phones.
- Microprocessor Control with different charging & maintenance profiles for Lead Acid based & LiFePO4 battery.
- One button selection of battery types then set and forget operation.
- Microprocessor constantly monitors the battery status to deliver the right amount of charge without overcharge or drying out the electrolyte
- Thermal control regulates charging current in hot or enclosed condition.
- Charger can be connected for long period of time to battery without overcharging.
- Special charging profile for LiFePO4 battery: soft-bulk, bulk then free float stage. No auto-repair.
- Lead Acid based battery:
- Cold & normal temperature charge selection for LEAD & AGM battery
- Initial qualifying checks, auto-repair, soft-bulk, bulk, pulse absorption, free float stages.
- Suitable for car & deep cycle type battery from 16Ah to 180Ah.
- Maximum 8 hour pulsing repair charging for suphated and deeply depleted lead acid based battery.
- Supplied with 2 exchangeable leads with clamps & eyelet terminals.
Safety
- Spark free – charger only starts charging when it is connected to a suitable battery so no spark during first contact with battery terminal
- Reverse Polarity & Short Circuit Protection with warning LED, charger returns to normal when fault is cleared.
- Over Voltage Protection- Charger will shut down when output senses higher than 16.5V & charger recovers when fault disappears.
- Maximum repair charge period is 8 hours and charger will indicate battery is defective.
- Auto shut down when Bulk & Absorption charge is over 40 hours to avoid waste of energy on defective battery.
- Convection cooled with thermal regulation to lower the charging current till unit’s temperature drops.
- In the event of persistent rising temperature, charger will shut down its output with warning led.
